Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.
Needle guider. Longarm needle setting/positioning tool.

Needle guider. Longarm needle setting/positioning tool.

Regular price
$15.00
Sale price
$15.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

 

Do you struggle with the setting up you longarm needle in right position? Does your thread shred because you put your needle not correctly? Do you like working with the thin thread and you need to turn your needle a bit? Or maybe it is hard to see the needle eye for correct positioning?

We worked on resolving the needle positioning problem and now that process can be much easer.

Use our NEEDLE GUIDER to set up your longarm needle to correct 0 degree angle or if it  is needed, easily turn it to the desirable angle following the arrow on the tool.

Guider works with all sizes of needles. Guider has an arrow you may follow  to be more accurate. 

Please follow the photos attached to this listing to place the needle in to the guider. Watch the VIDEO or follow instruction to use the tool correctly.

 Once you start using it, you will be amazed how easy it may be to set up your needle or change needle position angle.

Material: light weight cast acrylic. Overall dimensions are 3"x2". 

INCRUCTIONS

  1. Hold the tool with arrow pointed at you.
  2. Put the needle scarf back through the slot at the engraved mark. Slide the needle down  (approx. half down between the shank and needle eye).
  3. Squeeze the tool with you left hand to keep the needle in place. Thanks to needle anatomy it will turn to the correct position.
  4. Keep holding the tool tight and put the needle into the needle holder of your machine.
  5. The arrow will show the position of the needle eye.
  6. Watch the arrow direction to double check the position of the needle. 
  7. Tighten the screw.
  8. Release the tool, slide it down and right all the way out.

If you have any questions let us know.